Tech Rider
Venue Must Supply
Mixer
Primary
1x Pioneer DJM V10
Alternate
1x Pioneer DJM A9
Channels to connect in set-up order specified - left to right
All channels at line level and gain-matched. No compression, limiting or EQ inserted on the booth send without prior notice.
Backup input kept free: one spare stereo channel plus 3.5mm and 6.3mm jack-to-RCA leads, for laptop in the event of a player failure.
Working headphone output on the mixer, tested before doors.
CDJ
4x AlphaTheta / Pioneer CDJ-3000X
CDJ-3000 Accepted Fallback
CDJ-2000NXS2 only by prior WRITTEN AGREEMENT
All players linked via Pro DJ Link on a dedicated gigabit switch with CAT5e/6 patch cables. Not daisy-chained.
Latest Firmware installed
Monitors
2x Funktion-One F1201
Or prior agreed equivalent - IN WRITING
One per side of the booth, at exactly 180° to each other.
1x sub per side - Funktion-One BR118 / F121, or L-Acoustics SB28 or equivalent.
The F1201.2 is a 55 Hz–20 kHz mid-top and does not deliver booth low-end on its own.
Monitors at standing ear height (approx. 1.6–1.8 m), aimed at the DJ position. Never on the floor and never above head height.
Correctly amplified and processed to Funktion-One specification (approved XO / DSP preset). Not run from spare house amplifier channels.
Monitor level and EQ must be adjustable from inside the booth, by the DJ, without calling a technician.
Booth monitoring on its own send, independent of the main system.
Booth
Table
Minimum height 110cm
Mandatory
Permanent
If this is a permanent club set-up, please provide photos of the booth from various angles to show mixer, decks, monitoring and booth space in relation to main crowd.
Mandatory
Other
No people in booth during the set
Tables or dancers at least 2MTS away from DJ Booth
Downloads